Mezz Floor Goods Lifts London

Mezz Floor Goods Lifts; 1500kg Twin Mast 3 Stop Goods Lift installed Park Royal London. Platform size 3000mm x 3000mm finished anti-skid checker plate, finished floor levels 3500mm to 7000mm. Goods Lift is installed in a 250mm pit (by others) and has a travel speed 10cm per sec. Goods Lift fitted with load indication – slow down switch for soft landing. For safety as personnel will be operating / working on the platform the Goods Lift is fitted with shoot bolts, these engage into the main ring beam of the support structure at upper level making the platform ridged and safe for personnel. Power requirements are 5.5 Kw - 380 Volt nominal current = 12.5 Amp. Cue current = 87.5 Amp. A fully supporting lift structure, manufactured from box section steel with 25mm² galvanised mesh infill sides and side-hinged loading gates at each level, G/Floor centre opening gates to a height of 2600mm with the top floor gates to a height of 1,500mm. The gates fitted with heavy duty interfaced lock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if a loading gate on any level is not fully closed. Goods Lift finished in Light Grey (RAL 9006) Dark Grey (RAL 7016) Safety In compliance with E.C rules. (Machinery Directive 2006/42/EC) Installed, Western Road, Park Royal, London, NW10 7LT For a quotation please contact; Manual Handling Solutions 58, Paige Close, Watlington, King's Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://goodslifts.website/ http://www.goodslifts.website/goods-lift-park-royal/