Menu

Mezzanine Floor Lift RAF Menwith Hill, North Yorkshire

11-09-2018

Goods Lift Installed at RAF Menwith Hill, North Yorkshire. Goods lift to be installed through a mezzanine floor.The lift will be constructed using a single mast which will be supported by the mezzanine floor structure and a steel framework bolted to the floor. The lift platform will measure approximately 1450mm wide by 1200mm deep (to pass through an opening 1500 x 1500mm) and will close down over the legs. The clear working platform area will be 1390mm x 1140mm. The overall plan size of the lift will be approx 1450mm wide x 1450mm deep. The platform will feature 1100mm high rails on all sides and a single outwards opening gate on side A. The gate will lock with a gravity system but will also be sensed to prevent platform movement if the gate is open. The platform will close to the floor with a 60mm lowered height and have a total raised height of 2565mm. At the top level, the lift height will be governed by a limit switch system to ensure that the platform parks with the floor. The platform will be supplied with a loading ramp, 1450mm wide by 600mm long. The hydraulic power pack will be mounted to the mast and electrical system will be housed in a separate wall mounted box at ground level. Control points will be positioned at both levels. All points will feature latching call buttons and emergency stop controls. Power requirement for the lift: 415V 3 phase + Neutral via 16amp isolator (Supplied by customer) Motor specification: 0.8Kw 3phase 415V with 3ltr reservoir Maximum lift capacity will be 50Kg Manufacture and install 1 off external guard system The lift will be supplied with a full height enclosure for both levels. Ground level will have a four sided external guard, measuring 2150mm long (to accommodate the supporting framework), 1900mm wide, 2250mm high. Mezzanine floor level will have a three sided external guard, measuring 1700mm long, 1900mm wide, 1100mm high. Gates: Single outwards opening gate on side A at both levels. The gates will be fitted with electrical interlocks to prevent opening when the lift is not parked. Installation of the lift at: Menwith Hill, North Yorkshire. Contractor Carillion PLC Manual Handling Solutions (MHS.COM Ltd) offer bespoke custom design Goods Lifts, Mezzanine Floor Lifts, Mezzanine Goods Lifts, Material Lifts, Pallet Lifts to suit a wide range of different applications. All our goods lifts have a range of options and are built to suit individual customer requirements. Full details from Manual Handling Solutions (MHS.COM Ltd) 58, Paige Close Watlington, King's Lynn, Norfolk PE33 0TQ UK Tel 01553 811977 sales@manualhandlingsolutions.co.uk www.manualhandlingsolutions.co.uk http://goodslift.website/
ENQUIRY FORM

More News

  • Goods Lift Bryant Broadcast Croydon

  • Exxon Mobil Small Archive Storage Goods Lift

  • Goods Lift One Stop Shop Oldbury West Midlands

  • Mezzanine Goods Lift Dartford Kent