Mezzanine Goods Lift

Mezzanine Goods Lift installed Elstree Hertfordshire with maximum working load 250kg, enclosed in a self-supporting mesh shaft. Platform size 1300mm x 1100mm and guarded 900mm high on the non-loading edges. At the entrance to the lift at both levels there will be 2000mm high gates, which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level and prevent the lift being operated unless all gates are closed. At the lower level a 500mm long fixed ramp will be provided to assist loading on to the 50mm deep platform. Power requirements – supply 20 amp, 240 volt, single-phase supply is required terminated in a double pole switch at the lower level. Control is via a hold to run, push button control station adjacent to the gates at both levels. • Mezzanine Floor Goods Lift supplied CE Marked with Declaration of Conformity. • Operation and Maintenance Manual issue on completion. • LOLER Report of Thorough Examination and Test issued on commission. • Operator training carried out on completion. Installed and commissioned; Elstree, Borehamwood, Hertfordshire For a quotation please contact; Manual Handling Solutions 58, Paige Close, Watlington, King's Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://www.manualhandlingsolutions.co.uk http://goodslifts.website/ http://www.goodslifts.website/mezzanine-goods-lifts/