Arcotherm GE65 D/V69kw Direct Fired Heater

Product Code: GE65 D/V

Details

The GE65 Direct Fired Oil Heater has an output of 69kW (235,000 BTUs / Hr), and is available with a range of optional accessories, to include fuel gauge, fuel tank filter and a pneumatic wheel kit.
The unit has a metal tank which is capable of supporting approximately 12 hours of continuous operation from a full tank of fuel; the fuel lines are a hydrocarbon resistant rubber with a reinforced metal sheath.

The automatic ignition process is supported by a Suntec fuel pump, ensuring a consistently high quality of operation; this is backed up by an electronic flame control device and a safety thermostat, together with a post ventilation process for added protection of the AISI 430 Combustion Chamber.
The GE65 can be used as either a manual heater, with the switch to position (I), or in automatic with the switch set to position (II) and a Heavy Duty Thermostat (02AC582) fitted. The Heavy Duty Thermostat has a temperature range of -5/+50°C and is supplied complete with a 10m cable.
As with all direct fired heaters, the GE65 should only be used in a well ventilated area; typical uses for the GE65 include horticulture / agriculture, construction, and the heating of workshops, foundries, etc.
Where longer-term use is required, the GE65 can be converted to work from a single-pipe system and a tigerloop; the unit is then usually connected to a bulk fuel tank or similar IBC

Heater Dimensions
1200mm x 555mm x 860mm

Packaged Heater Dimensions
1200mm x 480mm x 892mm

Product Weight
58 Kg

Packaged Weight
66 Kg

Heating Capacity
69 kW

Heat Efficiency
100%

Air Flow
2,500 m³/h

Air Temperature
120 °C

Fuel Consumption
5.48 l/hr

Tank Capacity
65 Litres

Electrical Power
598 Watts

.